Washing Line for Plastic Molds and Plates
Food

Washing Line for Plastic Molds and Plates

Washing and drying line for moulds and plates. Capacity is 250–300 pcs/h for moulds and 300–350 pcs/h for plates, with a dedicated wash programme for each. After drying, less than 2 g of water remains on a mould and less than 1 g on a plate.

Location
Finland
Completed
March 2024
Manufacturing Time
6 months

Key features

  • Moulds 250–300 pcs/h
  • Plastic plates 300–350 pcs/h
  • Steam heating, wash water +50–60 °C
  • Wash tanks 2 × 500 l
  • Residual water under 2 g per mould, under 1 g per plate

The line washes and dries moulds (1110×235×35 mm) and plates (560×340×2 mm). Capacity is 250–300 pcs/h for moulds and 300–350 pcs/h for plates. Each product has its own wash programme, and the manually adjustable side guides are set to the product size.

Washing

Products are fed onto the conveyor upside down, long side first. Washing uses an acid-resistant pump (15 kW, 400 l/min, 6–8 bar), and the nozzle direction is adjustable. There are two 500-litre wash tanks, each insulated and steam-heated (+50–60 °C). The washing unit uses water from the pre-rinse, and solids are removed by a dual mesh filter.

Rinsing

Rinsing takes place in two stages. In the final rinse the products are rinsed with mains water at 55–65 °C, which is then recirculated to the pre-rinse tank. The pre-rinse has an acid-resistant pump (1.5 kW, 100 l/min, 1.5–2 bar) and a dual mesh filter.

Drying

The drying unit has two blowers (5.5 kW, 2×2,500 m³/h). Adjustable nozzles direct the airflow at each surface separately. After drying, less than 2 g of water remains on a mould and less than 1 g on a plate, and the products are at 35–45 °C.

Dosing and monitoring

Detergent is dosed automatically by a diaphragm pump controlled by a conductivity sensor. Detergent concentration is monitored and adjusted from the user interface. The line also measures electricity and water consumption and counts washed parts, with the data shown on screen in real time.

Images

Interested?

Contact us and tell us about your needs. We'll tailor a solution that meets your requirements.

Contact Us