
Crate Washing Line for Transbox crates
Automated washing line for Transbox crates, covering stack infeed and destacking, washing, drying and automatic stacking. Capacity is 1000 crates per hour. Final rinse water is recirculated to the pre-rinse, and 6–12 g of water remains per crate after drying.
- Location
- Finland
- Completed
- July 2025
- Manufacturing Time
- 9 months
Key features
- Capacity 1000 pcs/h
- Sticker removal system
- Manual crate feeding option 600 pcs/h
- Electrical heating
- Residual water after drying 6–12 g/crate
Crate stacks are lifted by hand from pallets onto stack conveyors, and from there the line handles destacking, washing, drying and stacking for palletising.
Infeed
The stack conveyors hold 13 stacks per lane and transfer the stacks automatically to the destacker, which takes two crates at a time from the top of the stack. Overhead conveyors carry the crates to debris removal, where they are turned upside down to tip out loose debris, and are then fed into the washing machine.
Washing
The washing machine has four stages:
- Pre-wash: 11 kW pump, 400 l/min, 900 l insulated tank, 18 kW heating, +40–50 °C, adjustable spray pipes
- Main wash: 15 kW pump, 600 l insulated tank, 27 kW heating, +55–60 °C, drum filter
- Pre-rinse: 1.1 kW pump, 600 l tank, 18 kW heating, +45–60 °C
- Final rinse: mains water at approx. 55 °C
Final rinse water is recirculated to the pre-rinse, which keeps the water changing and saves energy. The tunnel covers can be lifted for maintenance.
Drying
The dryer has four 5.5 kW blowers with a combined airflow of 10,000 m³/h. Nozzle angle and gap can be adjusted for each side of the crate. After 90 seconds of drying, 6–12 g of water remains per crate.
Outfeed and stacking
A plastic slat conveyor takes the washed crates either to manual stacking or to the automatic stacker. The stacker forms full stacks and transfers them to a stack conveyor that holds five stacks, one pallet load.
Safety and controls
- Mesh guarding based on the risk assessment
- Door interlocks and door limit switches
- Emergency stop and reset buttons at the doors
- Siemens PLC control with touchscreen
- Integrated software monitoring
Images
Similar Projects
Discover other similar projects we've completed.
Interested?
Contact us and tell us about your needs. We'll tailor a solution that meets your requirements.
Contact Us


