Fully Automated Crate Handling and Palletizing System
BakeryBeverageFoodLogistic

Fully Automated Crate Handling and Palletizing System

Automated system that unloads roll cages and pallets of return crates, combines partial stacks into full ones, palletises the stacks with an ABB robot and wraps the finished pallets. It handles Transbox, EPS and DLT crates as well as PALPA crates. Control is by Siemens PLC, with remote access.

Completed
November 2025
Manufacturing Time
12 months

Key features

  • Crate types: Transbox, EPS, DLT, PALPA
  • Automatic roll cage unloading
  • Dedicated stack combiner for each crate type
  • Palletising with an ABB IRB 710 robot
  • Recipe-based pallet wrapping
  • Siemens PLC, ProfiNet and remote access

The system covers the whole chain, from unloading a roll cage or pallet to a wrapped pallet ready for dispatch.

Roll cage unloading

Before loading, the operator makes sure that the stacks in the roll cage contain only one crate type. The roll cage moves from the infeed conveyor via a buffer position to a transfer car, which takes it to the unloading position. There, pneumatic pushers push both stacks out of the cage, and the empty roll cage leaves the line automatically.

Stack combining

The operator unloads partial stacks from pallets onto receiving stack conveyors, which act as a buffer before combining. Each crate type has its own combiner, which uses laser guidance to lift crates from partial stacks on top of each other until the stack is full. For Transbox crates, the system checks the orientation of the stack and turns it 180° when needed so that the crates stack correctly.

Palletising and wrapping

Full stacks go to stack buffer conveyors and from there by transfer car to the palletising station, where an ABB IRB 710 robot places them on the pallet. The wrapping machine wraps the pallet using recipe-specific settings, and the finished pallet leaves on conveyors.

Construction and controls

The system is built from stainless steel, and the motor drives are controlled by frequency converters. Control is based on a Siemens PLC and ProfiNet network, with decentralised I/O and multiple safety zones. The system is CE marked. A remote connection allows fault-finding and user support to be handled remotely.

Images

Interested?

Contact us and tell us about your needs. We'll tailor a solution that meets your requirements.

Contact Us